New Vermeer SC30 TX Stump Grinder MO7908

1 Video

Machine Details

Industry Arboriculture and Forestry
Condition New
Asset Type Stump Grinder
Hours/Mileage (or N/A?)
Make Vermeer
Model SC30 TX
Age New
Seller type Direct
Drive Type Tracked
Fuel or Power type Petrol
Stock id MO7908
Features
  • Direct from manufacturer
  • Low and No Deposit
  • Low Rate Finance Offer
  • Manufacturers Warranty
  • National Delivery
  • Tracked
  • Trailer Solutions
  • VAT Deferral Available

New Vermeer SC30 TX Stump Grinder MO7908

Let's find out what they have to say about this machine...

Key features:

  • AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.
  • Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

With a focus on ease-of-operation, the compact design of the SC30TX offers intuitive controls, minimal service points and the performance of a machine that gets the job done. The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.

Machine specification:

General Dimensions and Weights –
Make & Model: Kohler ECH740
Number of Cylinders: 2
Gross Horsepower (Maximum): 25 hp 18.6 kw
Torque (Max): 42 ft-lb 56.9 Nm
Fuel Tank Capacity: 25.7 L
Max Fuel Consumption: 9.1 lph
Fuel Type: Petrol
Air Cleaner: 15.2 cm (6 “) 2-Stage dry
Oil Filter: Spin-on
Recommended Oil: Kohler oil or API CH4/SJ
Oil Volume with Filter: 1.9 L
Maximum Angle of Continuous Operation: 25 deg
Cooling Medium: Air/oil
Cutterwheel System –
Cutterwheel Diameter without Teeth: 40.6 cm (16″)
Cutterwheel Thickness: 1.3 cm (5″)
Cutterwheel Speed: 1110 rpm
Cutterwheel Straight Line Dimension: 90.2 cm (35.5″)
Cutterwheel Cut Above Ground: 63.5 cm (25″)
Cutterwheel Cut Below Ground: 30.5 cm (12″)
Tooth Description: Yellow Jacket Cutter System
Number of Teeth: 16
Number of Indexes: 2
Number of Pockets: 16
Reversible Pockets: Yes
Cutterwheel Guard: Yes
Chip Containment: 1 cu m (2.2 cu ft)
Cutterwheel Drive Components –
Lower Gearbox: Hydraulic motor
Hydraulic System –
Tank capacity: 34.1 L
Recommended Oil Type: ISO 68
System Type: Open Loop
Filtration Method: Inline Return Filter
Pump Flow at Maximum RPM: 60.6 L/min
System relief pressure: 2750 psi 189.6 bar
Flow Control: Autosweep (option)
Directional Control: Standard
Oil Cooler: Yes, Fan-cooled
Electrical System –
System Voltage: 12
Battery: 405
Standard Gauges: Hour meter/tach
Switches: Cutter wheel drive
Controller: Yes
Chassis –
Control Station Description: Fixed-rear
Track Drive System –
Track Type: Rubber 7 ” (17.8 cm) width
Track Width – Retracted: 35 ” (88.9 cm)
Track Width – Extended: 35 ” (88.9 cm)
Track Length on Ground: 31.4 ” (79.7 cm)
Number of Idlers 5
Track Drive Pump Type: Hydrostatic
System Relief Pressure: 2900 psi (200 bar)
Pump Flow at Maximum RPM: 11.4 gpm (43.1 L/min)
Track Drive Motor Type: Geroter
Track Brake Type: Hydrostatic
High Speed Travel: 3.2 mph
Ground Bearing Pressure – Soft Ground: 3.4 psi 23.4 kPa
Other Options –
Special Paint: Per Request
Extended Warranty: Per Request
Preventive Maintenance: Per Request

But are we right???

Our team loves to be right about everything! Don’t we all?!!!

However, sometimes we or our trusted team of supplies gets it wrong. If you find our technical data incorrect, please let us know so we can make it right.

Email: theteam@arblease.co.uk

Thanks for your support.

#teamgame #100%impartial #100%arb

REQUEST A CALL BACK

  • This field is for validation purposes and should be left unchanged.

x