The Avant 700 SERIES – Power for professionals with outstanding handling capacity
Avant 700 series offers strong and real multi-use loaders for jobs where high lift capacity and/or drive speed is needed, yet at the same time the machine shall be as compact as possible.
The 700 series is the perfect tool for street cleaning and other property maintenance tasks on narrow streets and yards in the cities, lifting and handling bales, etc. on farms, handling paving stones, moving materials on construction sites, and in many other applications. Easy transportation with a car trailer and a high drive speed enable quick transfers between work sites.
High flow auxiliary hydraulics runs all Avant attachments which further increases the versatility of the machine.
A wide range of options increases operator comfort as well. 700 series can be fitted with all cab options, also with A/C, which ensures the perfect conditions for a full day’s work.
- Lift capacity 1400 kg
- Lift height 3.1 m
- Engine power 49-57 hp
- Drive speed 11-26 km/h
- Cab options L/LX/DLX available, DLX also with A/C
- Easy to transport with a car trailer
- Optidrive™ drive circuit gives more power for the drive and hydraulic attachments
The tool that will become your best friend.
Check out all the options for the 700 series here: OPTIONS
Check out the specialist Forestry and Arb attachments Avant offer: FORESTRY & ARB
Check out the full range of over 200 attachments: Full Attachment Range
–
Secure
Avant’s ingenious articulated design where the driver sits in the front chassis and has a perfect view on the attachment and work area means low center of gravity of the machine, which is an important factor in the stability. Also the rigid articulation joint which doesn’t swing sideways increases stability in all situations and at the same time best possible traction can be achieved thanks to the advanced 4×4 system.
All Avant loaders are equipped with an open ROPS/FOPS certified cab as standard, and also the optional enclosed cabs (L, LX, DLX, GT) comply with the ROPS/FOPS standards.
Telescopic boom
While Avant loaders are made as compact as possible, the reach and lift height do not suffer from it.
Avant’s telescopic boom makes it possible to have a very compact machine with a great outreach and lift capacity. When the telescopic boom is retracted it is possible to lift heavier loads. With the boom fully extended, the reach and lift height are unparalleled.
In many cases, it is possible to load a trailer from one side thanks to the outreach of the telescopic boom and still have excellent all-round visibility.
Versatile
Avant attachments have been designed to work as an equal partner on Avant loaders. The best machine-attachment combination and work efficiency can only be achieved when a good machine is fitted with attachments that are specifically designed for the machine. The dimensions, auxiliary hydraulics output and other features of Avant are in perfect balance with the attachments.
Avant loaders and attachments have been designed for year-round use which ensures that the machine is never sitting idle. The wide range of options available for the loaders – like four different cabs, extra work lights, the Opticontroltm attachment control system, etc. – together with technical solutions in the loaders make Avant as comfortable to use in the winter cold as it is on a sunny summer afternoon.
Avant’s hydraulic multi-connector system for coupling the attachment’s hydraulic hoses guarantees easy and effortless connecting and detaching in any situation with a single hand movement. It can be done with the engine running and/or pressure in the attachment, also in freezing ambient temperatures. The mechanism is leak-free and cannot be connected in the wrong way.
Avant 4×4
All articulated Avant loaders are equipped with a hydrostatic drive system. There is a hydraulic drive motor on each wheel. The drive circuit is equipped with valves with which traction can be controlled in different situations. In order to avoid tyre marks on soft and sensitive surfaces when turning, the system allows the wheels on the left and right sides of the loader to roll at different speeds. This also reduces tyre wear on hard surfaces.
The valves in the drive system work like a hydraulic 4×4 diff lock and equalize the oil flow between the left and right side hydraulic motors, improving traction on slippery and uneven surfaces.
Check out this video showing the drive modes in detail: DRIVE MODES
TECHNICAL INFORMATION – AVANT 735
- LIFT CAPACITY 1400 kg
- ENGINE POWER 26 hp diesel
- LIFT HEIGHT 3.1 m
- SPEED 11 km/h
SPECIFICATIONS
LENGTH 3060 mm
WIDTH 1290 mm
HEIGHT 2060 mm
WEIGHT 1800 kg
STANDARD WHEELS 320/60-12 HD TR
TRANSMISSION, DRIVE Hydrostatic Avant OptidriveTM
PULLING FORCE MAX. 1200 kp
DRIVE SPEED MAX. 11 km/h
AUX. HYDRAULICS OIL FLOW / PRESSURE 50 l/min 200 bar
TURNING RADIUS INSIDE/OUTSIDE 1240 / 2780 mm
LIFTING HEIGHT TO PIVOT POINT 3080 mm
MAX. LIFTING CAPACITY (HYDR.) 2100 kg
MAX. TIPPING LOAD* 1400 kg
MAX. BREAKOUT FORCE / 50 CM 1700 kg
ENGINE MAKE AND TYPE Kubota V1505 Stage V, 4-cyl.
ENGINE OUTPUT (ECE R120) 19 kW (26 hp)
MAXIMUM TORQUE 93 Nm @ 1700 rpm
FUEL Diesel
TECHNICAL INFORMATION – AVANT 755i
- LIFT CAPACITY 1400 kg
- ENGINE POWER 57 hp diesel
- LIFT HEIGHT 3.1 m
- SPEED 17 km/h
SPECIFICATIONS
LENGTH 3060 mm
WIDTH 1290 mm
HEIGHT 2060 mm
WEIGHT 1970 kg
STANDARD WHEELS 320/60-12HD TR
TRANSMISSION, DRIVE hydrostatic Avant OptidriveTM
PULLING FORCE MAX. 1330 kp
DRIVE SPEED MAX. 17 km/h
AUX. HYDRAULICS OIL FLOW / PRESSURE 80 l/min 225 bar
TURNING RADIUS INSIDE/OUTSIDE 1240 / 2780 mm
LIFTING HEIGHT TO PIVOT POINT 3080 mm
MAX. LIFTING CAPACITY (HYDR.) 2100 kg
MAX. TIPPING LOAD *) 1400 kg
MAX. BREAKOUT FORCE / 50 CM 1700 kg
ENGINE MAKE AND TYPE Kohler KDI 1903 TCR Stage V
ENGINE OUTPUT (ECE R120) 42 kW (57 hp)
MAXIMUM TORQUE 220 Nm @ 1500 rpm
FUEL Diesel
TECHNICAL INFORMATION – AVANT 760i
- LIFT CAPACITY 1500 kg
- ENGINE POWER 57 hp diesel
- LIFT HEIGHT 3.1 m
- SPEED 26 km/h
SPECIFICATIONS
LENGTH 3060 mm
WIDTH 1450 mm
HEIGHT 2110 mm
WEIGHT 2100 kg
STANDARD WHEELS 400/50-15 TR
TRANSMISSION, DRIVE hydrostatic Avant OptidriveTM
PULLING FORCE MAX. 1880 kp
DRIVE SPEED MAX. 26 km/h
AUX. HYDRAULICS OIL FLOW / PRESSURE 80 l/min @ 225 bar
TURNING RADIUS INSIDE/OUTSIDE 1240/2780 mm
LIFTING HEIGHT TO PIVOT POINT 3100 mm
MAX. LIFTING CAPACITY (HYDR.) 2100 kg
MAX. TIPPING LOAD * 1400 kg
MAX. BREAKOUT FORCE / 50 CM 1700 kg
ENGINE MAKE AND TYPE Kohler KDI 1903 TCR Stage V
ENGINE OUTPUT (ECE R120) 42kW (57 hp)
MAXIMUM TORQUE 220 Nm @ 1500 rpm
FUEL Diesel
–
But are we right???
Our team loves to be right about everything! Don’t we all?!!!
However, sometimes we or our trusted team of supplies gets it wrong. If you find our technical data incorrect, please let us know so we can make it right.
Email: theteam@arblease.co.uk
Thanks for your support.
#teamgame #100%impartial #100%arb
Buy machinery with low fixed-rate finance options tailored to suit your cash-flow, budget and situation.
Finance for machinery and businesses in the sectors of arboriculture, groundcare, farming, construction and many other ground based industries. All arranged online and fast! Get a quote 24/7!
Used disclaimer: This machine has not yet been qualified. Arblease will fully qualify & HPI check this asset before this sale. Our procedures are in place to protect you against stolen and substandard machinery. We operate in the best way possible to protect our community from theft and substandard machinery, enabling you to buy machinery and vehicles, with finance, safe and assured.