Ryetec KTS 10 Ton Forestry Trailer & 6.4 M Crane Brand New

From £237.00 +VAT Per Month
From £54.51 +VAT Per Week

Low cost finance available on NEW Ryetec KTS 10 Ton Forestry Timber Trailers & 6.4 M Cranes

– Call 01604 623644 / Email

Let’s find out more about the machine!

The Ryetec KTS forestry timber forwarding trailers offer a premium machine, designed and manufactured to operate reliably for years in the toughest conditions.

CAPACITIES:

  • 5 tons with an effective standard load area of 1.8m³
  • 11 and 10 tons with an effective standard load area of 2.35m³
  • NEW 13-ton ladder frame trailer & slide out rear extension with load area 3.4m³

FEATURES & OPTIONS AVAILABLE:

  • 40° Steering drawbar with twin rams (single ram on 8.5 ton).
  • Robust spine chassis 180mm x 180mm with 6mm (8.5 ton),8mm (10 ton) or 10mm (11 ton) thick wall. Ladder chassis on 13 ton with rear slide out extension (4metres + 0.8m)
  • 80mm x 80mm gate tested to withstand 1/3 of trailers rated load on top corner without failure complete with saw box (not 8.5 ton).
  • Pivoting tandem axle bogies with 30° articulation for rough ground.
  • 6 metre long bed (4m on 13ton) with optional slide out extension or longer chassis up to 4.8 metres.
  • Powered axle.
  • Brakes, hyd on 2 or 4 wheels or air on 4 wheels

 

 

 Trailer 8.5 tonTrailer 10.0 tonTrailer 11.0 ton
Maximum load8.5 ton10.0 ton11.0 ton
Standard crane; it is possible to install a crane up to 7.5 m5.3 m6.4 m6.7 m
Effective load area1.80 m22.35 m22.35 m2
Chain saw boxExtra equipmentYes/standardYes/standard
GateYes/standardYes/standardYes/standard
Gate height1100 mm1400 mm1400 mm
Stake height1100 mm1400 mm1400 mm
Dimensions on stakes89 x 6 mm89 x 6 mm89 x 6 mm
Stake extensionsNo, stakes are in one pieceNo, stakes are in one pieceNo, stakes are in one piece
Divider stakes, for timber sortingExtra equipmentExtra equipmentExtra equipment
No. of bolsters233
More bolsters can be fittedYesYesYes
Hydraulic support legsYes/standard folding legsYes/standard folding legsYes/standard folding legs
Telescopic support legsExtra equipmentExtra equipmentExtra equipment
Trailer steeringYes/standardYes/standardYes/standard
No. of steering cylinders122
Max. steering angle40° to both left and right40° to both left and right40° to both left and right
Towing eye to tractorForged towing eye for hitch connectorForged towing eye for hitch connectorForged towing eye for hitch connector
Lubricatable bushings or link bearings in all jointsYes/standardYes/standardYes/standard
Diameter of steering pivot70 mm70 mm70 mm
BogiesYes/standardYes/standardYes/standard
Tip angle of bogies+/- 30°+/- 30°+/- 30°
Axle separation995 mm995 mm995 mm
Distance on bogie from centre of front axle to centre of pivot530 mm530 mm530 mm
Track width1622 mm1622 mm1622 mm
Tyre size standard400/60 x 15.5400/60 x 15.5400/60 x 15.5
Other sizes available to order14-ply14-ply14-ply
Tractor tread
Brakes, drum or discExtra equipmentExtra equipmentExtra equipment
Number of hydraulic outlets required2 double-acting

Extra equipment available to enable use with 1 single-acting and 1 return.
2 double-acting

Extra equipment available to enable use with 1 single-acting and 1 return.
2 double-acting

Extra equipment available to enable use with 1 single-acting and 1 return.
Brake hoses run fully protected in frame or substantial steel tubesYes/standard when trailer is fitted with brakesYes/standard when trailer is fitted with brakesYes/standard when trailer is fitted with brakes
Support footYes/standardExtra equipmentExtra equipment
Hydraulic wheel driveExtra equipmentExtra equipmentExtra equipment
Stub shaft dimension70 x 70 mm80 x 80 mm80 x 80 mm
Central frame of special steel180 x 180 x 5 mm180 x 180 x 8 mm180 x 180 x 10 mm
Loading width at bottom of load area910 mm910 mm910 mm
Loading width at top of stakes1830 mm1830 mm1830 mm
Loading width at top of stakes for brushwood equipment3000 mm3000 mm3000 mm
Overall height including crane at hitch height 400 mm
(This dimension depends on the height of the tractor hitch hook)
About 2668 mmAbout 2968 mmAbout 2773 mm
Recommended tractor power for full load45 hp and up60 hp and up65 hp and up
Weight, complete timber trailer2170 kg
2345 kg2570 kg
Weight complete, without crane and 3-point adaptor1360 kg1495 kg1555 kg

 

 

CHOICE OF CRANES:

  • 5.3 metres reach
  • 6.4 metres reach
  • 6.7 metres reach
  • 7.5 metres reach

STANDARD FEATURES INCLUDE:

  • Top mounted main lift cylinder to avoid damage and better lifting performance, lift capacity increases as log is lifted rather than decrease compared with conventional lower mounted ram.
  • 4 slew rams for maximum torque and even load on slewing gears with maintenance free rack shims.
  • ‘Comfort link’ allows second arm to fold completely back to main arm to load right up to gate.
  • Tractor hydraulically powered (PTO option).
  • Folding legs for maximum stability and speed of operation.
  • Crane easily removed from trailer to use on tractor 3-point linkage.
  • Remote greasing for main lift pivot pin and main lift cylinder

OPTIONS AVAILABLE:

  • Basic lever to fully proportional controls, light weight and remote are also available.
  • Winch with remote control.
  • PTO power pack.
  • Boom lights.
  • Telescopic legs

 

 Crane 5.3 mCrane 6.4 mCrane 6.7 mCrane 7.5 m
Reach5.3 m6.4 m6.7m7.5 m
Comfort joint to simplify workYes/standardYes/standardYes/standardYes/standard
Hydraulic extensionNoYes/1.2 mYes/1.2 mYes/2.0 m
Gross lifting force of crane3.5 ton meter3.5 ton meter5.0 ton meter5.0 ton meter
Grapple area of standard grapple0.18 m20.18 m20.21 m20.21 m2
Fully rotating rotatorYes/standardYes/standardYes/standardYes/standard
Rotator torque750 Nm (75 kpm)750 Nm (75 kpm)750 Nm (75 kpm)750 Nm (75 kpm)
Slewing attenuator on rotator linkYes/standardYes/standardYes/standardYes/standard
Hydraulic support legs on the trailer when sold with craneYes/standardYes/standardYes/standardYes/standard
Telescopic support legs instead of support legsExtra equipmentExtra equipmentExtra equipmentExtra equipment
Hydraulic support legs when the crane is sold with a 3-point adaptorMechanical: standard Hydraulic: extraMechanical: standard
Hydraulic: extra
Yes/standardYes/standard
No. of slewing cylinders on slewing house4444
Slewing angle370° (360° is a complete revolution)370° (360° is a complete revolution)370° (360° is a complete revolution)370° (360° is a complete revolution)
Slewing torque10.4 kNm (1 060 kpm)10.4 kNm (1 060 kpm)13.0 kNm (1 326 kpm)13.0 kNm (1 326 kpm)
Height of slewing house290 mm290 mm290 mm290 mm
Hydraulic valve7 slides8 slides8 slides8 slides
Control levers7 lever1+1 levers with 2 functions each + 4 levers (known as 2-lever arrangement)1+1 levers with 2 functions each + 4 levers (known as 2-lever arrangement)1+1 levers with 2 functions each + 4 levers (known as 2-lever arrangement)
Other control lever systems availableYes, extra equipmentYes, extra equipmentYes, extra equipmentYes, extra equipment
Float position on hydraulic valveOn 2 functions: boom and slewing of craneOn 2 functions: boom and slewing of craneOn 2 functions: boom and slewing of craneOn 2 functions: boom and slewing of crane
Hydraulic valve suitable for open or closed hydraulic systems Closed hydraulic system for e.g. John DeereYes, extra equipmentYes, extra equipmentYes, extra equipmentYes, extra equipment
Recommended pump capacity Lower or higher flows can be used: the crane will simply perform more slowly or faster15-50 l/min20-60 l/min20-60 l/min20-60 l/min
System pressure Lower pressure: lifting capacity will be reduced. Higher pressure: no increase in lifting capacity, as the hydraulic system is fitted with a pressure relief safety valve.175 bar (175 kg/cm2)175 bar (175 kg/cm2)175 bar (175 kg/cm2)175 bar (175 kg/cm2)
Maximum pressure220 bar (220 kg/cm2)220 bar (220 kg/cm2)220 bar (220 kg/cm2)220 bar (220 kg/cm2)
Lubricatable bushings or link bearings in all jointsYes/standardYes/standardYes/standardYes/standard
3-point adaptor for 3-point hitch28 mm category 2, 825 mm between hydraulic arms attachment points28 mm category 2, 825 mm between hydraulic arms attachment points28 mm category 2, 825 mm between hydraulic arms attachment points28 mm category 2, 825 mm between hydraulic arms attachment points
Weight, including grapple, rotator and 3-point adaptor810 kg850 kg1 015 kg1 065 kg
Weight, 3-point adaptor250 kg250 kg250 kg250 kg
Weight, grapple65 kg65 kg80 kg80 kg

All performance specifications are pressure dependent are calculated at 175 bar pressure.

Equipment Type Trailers and Attachments
Make Ryetec
Model KTS 10 Ton Forestry Trailer & 6.4 M Crane
Manufacture Year NEW
Condition Brand New
Mileage (if applicable) Miles
Hours (if applicable)
Fuel Type (if applicable)
Price 237.00

    Related Listings

    Related Listings

    01604 623644Seller: Arblease