Peruzzo C2000 CHS Super Brand New

From £242.00 +VAT Per Month
From £55.66 +VAT Per Week

Low cost finance available on Peruzzo C2000 CHS Super Contractor Flail Mower Collectors

– Call 01604 623644 / Email

Let’s find out more about the machine!

KEY FEATURES:

  • 2 m/1.6 m/1.8 m/2.0 m/2.2 m cutting widths
  • Full width height adjustable rear roller with scraper
  • Optional front castor wheels, height adjustable with solid tyres for fine cutting height control
  • Ground (C) or high (CH) tipping of collected material
  • Heavy duty hardened cast flail hammers
  • Heavy duty gearbox with overrun clutch, and ‘V’ belt drive to rotor
  • SUPER version with stronger flail rotor, flails and mountings (18 mm fixing instead of standard 16 mm), heavy duty rotor bearings and skids.

Designed to perform even in the most extreme conditions

  • Particularly suitable in long/wet grass, scrub, heather, bracken and gorse
  • Three-point linkage mounted, easily manoeuvred even in confined areas and undulating ground conditions
  • Ground or high tipping models
  • Easy to control working height
  • Floating linkage allows machine to follow ground contours effectively
  • Suitable for use with larger compact and agricultural type tractors

Heavy duty cast hammer flail

The Contractor range feature a cast hammer type flail. The hardened cutting edge and weight of approximately 1 kg allow the machines to cut through material up to 75 mm in diameter. The ‘shovel’ design effectively throws the cut material into the hopper without requiring extra ‘draft or wind paddles’. The throwing action gives more efficient collection even in the wet. The straight cutting edge leaves a high quality finish and flails can be sharpened in situ several times through their normal working life. Flail maintenance is made easy by the automatic locking of the hopper in the raised position to allow full access to the blades and rotor from above.

MACHINE SPECIFICATION:

1 kg heavy duty cast flail hammers.
200 mm diameter adjustable rear roller with scraper.
Heavy duty gearbox with overrun clutch.
Robust chassis and integral collection hopper.
SUPER version (standard on 1600 to 2200) heavy duty flail rotor, flails and mountings (18 mm instead of standard 16 mm), hd rotor bearing & skids.
Engine: Yanmar 3TNV76
ModelWidth of cut (mm)Capacity (m³)Weight (kg)No. of hammersHeight of cut (mm)Min. tractor (hp)Ground tipHydraulic 2 m high tip
C1200 C12001.2500160 - 20025YESX
C1600 C Super16001.6690200 - 20035YESX
C1800 C Super18001.8790240 - 20050YESX
C2000 C Super20002.0830280 - 20060YESX
C1600 CH Super16001.9900200 - 20055XYES
C1800 CH Super18002.11000240 - 20075XYES
C2000 CHS Super 20002.351170280 - 20090XYES
C2200 CHS Super22002.61270300 - 200100XYES

Tractor requirements:

  • 540 rpm PTO shaft (1000 rpm optional)
  • 1 x double acting spool valve

Accessories/Spares

  • Twin wheel height adjustable front castor wheels
  • Heavy duty rotor bearings & mountings (ideal where stones are present) (standard on 2 m/2.2 m CHS SUPER models)
  • Side skids (standard on 2 m/2.2 m CHS SUPER models)
  • Front feeder plate (assists intake of tall material)
  • Volume reduction bar (C2000 CHS only)
Equipment Type Tractor Implements & Clearance Machines
Make Peruzzo
Model C2000 CHS Super
Manufacture Year NEW
Condition Brand New
Mileage (if applicable) Miles
Hours (if applicable)
Fuel Type (if applicable) PTO
Price 242.00

    Related Listings

    Related Listings

    01604 623 644Seller: Arblease