New Ryetec KTS 8.5 Ton Forestry Trailer (Timber) MO7945

Machine Details

Industry Arboriculture and Forestry
Condition New
Asset Type Trailer (Timber)
Hours/Mileage (or N/A?)
Make Ryetec
Model KTS 8.5 Ton Forestry
Age New
Seller type Direct
Drive Type PTO
Fuel or Power type N/A
Stock id MO7945
Features
  • Bespoke colour options
  • Direct from manufacturer
  • Franchised Main Dealer
  • Low and No Deposit
  • Low Rate Finance Offer
  • Manufacturers Warranty
  • National Delivery
  • VAT Deferral Available
  • Wheeled

New Ryetec KTS 8.5 Ton Forestry Trailer (Timber) MO7945

Let's find out what they have to say about this machine...

The Ryetec KTS forestry timber forwarding trailers offer a premium machine, designed and manufactured to operate reliably for years in the toughest conditions.

CAPACITIES:

  • 5 tons with an effective standard load area of 1.8m³
  • 11 and 10 tons with an effective standard load area of 2.35m³
  • NEW 13-ton ladder frame trailer & slide out rear extension with load area 3.4m³

FEATURES & OPTIONS AVAILABLE:

  • 40° Steering drawbar with twin rams (single ram on 8.5 ton).
  • Robust spine chassis 180mm x 180mm with 6mm (8.5 ton),8mm (10 ton) or 10mm (11 ton) thick wall. Ladder chassis on 13 ton with rear slide out extension (4metres + 0.8m)
  • 80mm x 80mm gate tested to withstand 1/3 of trailers rated load on top corner without failure complete with saw box (not 8.5 ton).
  • Pivoting tandem axle bogies with 30° articulation for rough ground.
  • 6 metre long bed (4m on 13ton) with optional slide out extension or longer chassis up to 4.8 metres.
  • Powered axle.
  • Brakes, hyd on 2 or 4 wheels or air on 4 wheels

CHOICE OF CRANES:

  • 5.3 metres reach
  • 6.4 metres reach
  • 6.7 metres reach
  • 7.5 metres reach

STANDARD FEATURES INCLUDE:

  • Top mounted main lift cylinder to avoid damage and better lifting performance, lift capacity increases as log is lifted rather than decrease compared with conventional lower mounted ram.
  • 4 slew rams for maximum torque and even load on slewing gears with maintenance free rack shims.
  • ‘Comfort link’ allows second arm to fold completely back to main arm to load right up to gate.
  • Tractor hydraulically powered (PTO option).
  • Folding legs for maximum stability and speed of operation.
  • Crane easily removed from trailer to use on tractor 3-point linkage.
  • Remote greasing for main lift pivot pin and main lift cylinder

OPTIONS AVAILABLE:

  • Basic lever to fully proportional controls, light weight and remote are also available.
  • Winch with remote control.
  • PTO power pack.
  • Boom lights.
  • Telescopic legs
Edit
Trailer 8.5 ton Trailer 10.0 ton Trailer 11.0 ton
Maximum load 8.5 ton 10.0 ton 11.0 ton
Standard crane; it is possible to install a crane up to 7.5 m 5.3 m 6.4 m 6.7 m
Effective load area 1.80 m2 2.35 m2 2.35 m2
Chain saw box Extra equipment Yes/standard Yes/standard
Gate Yes/standard Yes/standard Yes/standard
Gate height 1100 mm 1400 mm 1400 mm
Stake height 1100 mm 1400 mm 1400 mm
Dimensions on stakes 89 x 6 mm 89 x 6 mm 89 x 6 mm
Stake extensions No, stakes are in one piece No, stakes are in one piece No, stakes are in one piece
Divider stakes, for timber sorting Extra equipment Extra equipment Extra equipment
No. of bolsters 2 3 3
More bolsters can be fitted Yes Yes Yes
Hydraulic support legs Yes/standard folding legs Yes/standard folding legs Yes/standard folding legs
Telescopic support legs Extra equipment Extra equipment Extra equipment
Trailer steering Yes/standard Yes/standard Yes/standard
No. of steering cylinders 1 2 2
Max. steering angle 40° to both left and right 40° to both left and right 40° to both left and right
Towing eye to tractor Forged towing eye for hitch connector Forged towing eye for hitch connector Forged towing eye for hitch connector
Lubricatable bushings or link bearings in all joints Yes/standard Yes/standard Yes/standard
Diameter of steering pivot 70 mm 70 mm 70 mm
Bogies Yes/standard Yes/standard Yes/standard
Tip angle of bogies +/- 30° +/- 30° +/- 30°
Axle separation 995 mm 995 mm 995 mm
Distance on bogie from centre of front axle to centre of pivot 530 mm 530 mm 530 mm
Track width 1622 mm 1622 mm 1622 mm
Tyre size standard 400/60 x 15.5 400/60 x 15.5 400/60 x 15.5
Other sizes available to order 14-ply 14-ply 14-ply
Tractor tread
Brakes, drum or disc Extra equipment Extra equipment Extra equipment
Number of hydraulic outlets required 2 double-acting

Extra equipment available to enable use with 1 single-acting and 1 return.

2 double-acting

Extra equipment available to enable use with 1 single-acting and 1 return.

2 double-acting

Extra equipment available to enable use with 1 single-acting and 1 return.

Brake hoses run fully protected in frame or substantial steel tubes Yes/standard when trailer is fitted with brakes Yes/standard when trailer is fitted with brakes Yes/standard when trailer is fitted with brakes
Support foot Extra equipment Extra equipment Extra equipment
Hydraulic wheel drive Extra equipment Extra equipment Extra equipment
Stub shaft dimension 70 x 70 mm 80 x 80 mm 80 x 80 mm
Central frame of special steel 180 x 180 x 5 mm 180 x 180 x 8 mm 180 x 180 x 10 mm
Loading width at bottom of load area 910 mm 910 mm 910 mm
Loading width at top of stakes 1830 mm 1830 mm 1830 mm
Loading width at top of stakes for brushwood equipment 3000 mm 3000 mm 3000 mm
Overall height including crane at hitch height 400 mm
(This dimension depends on the height of the tractor hitch hook)
About 2668 mm About 2968 mm About 2773 mm
Recommended tractor power for full load 45 hp and up 60 hp and up 65 hp and up
Weight, complete timber trailer 2170 kg 2345 kg 2570 kg
Weight complete, without crane and 3-point adaptor 1360 kg 1495 kg 1555 kg

 

Crane 5.3 m Crane 6.4 m Crane 6.7 m Crane 7.5 m
Reach 5.3 m 6.4 m 6.7m 7.5 m
Comfort joint to simplify work Yes/standard Yes/standard Yes/standard Yes/standard
Hydraulic extension No Yes/1.2 m Yes/1.2 m Yes/2.0 m
Gross lifting force of crane 3.5 ton meter 3.5 ton meter 5.0 ton meter 5.0 ton meter
Grapple area of standard grapple 0.18 m2 0.18 m2 0.21 m2 0.21 m2
Fully rotating rotator Yes/standard Yes/standard Yes/standard Yes/standard
Rotator torque 750 Nm (75 kpm) 750 Nm (75 kpm) 750 Nm (75 kpm) 750 Nm (75 kpm)
Slewing attenuator on rotator link Yes/standard Yes/standard Yes/standard Yes/standard
Hydraulic support legs on the trailer when sold with crane Yes/standard Yes/standard Yes/standard Yes/standard
Telescopic support legs instead of support legs Extra equipment Extra equipment Extra equipment Extra equipment
Hydraulic support legs when the crane is sold with a 3-point adaptor Mechanical: standard Hydraulic: extra Mechanical: standard
Hydraulic: extra
Yes/standard Yes/standard
No. of slewing cylinders on slewing house 4 4 4 4
Slewing angle 370° (360° is a complete revolution) 370° (360° is a complete revolution) 370° (360° is a complete revolution) 370° (360° is a complete revolution)
Slewing torque 10.4 kNm (1 060 kpm) 10.4 kNm (1 060 kpm) 13.0 kNm (1 326 kpm) 13.0 kNm (1 326 kpm)
Height of slewing house 290 mm 290 mm 290 mm 290 mm
Hydraulic valve 7 slides 8 slides 8 slides 8 slides
Control levers 7 lever 1+1 levers with 2 functions each + 4 levers (known as 2-lever arrangement) 1+1 levers with 2 functions each + 4 levers (known as 2-lever arrangement) 1+1 levers with 2 functions each + 4 levers (known as 2-lever arrangement)
Other control lever systems available Yes, extra equipment Yes, extra equipment Yes, extra equipment Yes, extra equipment
Float position on hydraulic valve On 2 functions: boom and slewing of crane On 2 functions: boom and slewing of crane On 2 functions: boom and slewing of crane On 2 functions: boom and slewing of crane
Hydraulic valve suitable for open or closed hydraulic systems Closed hydraulic system for e.g. John Deere Yes, extra equipment Yes, extra equipment Yes, extra equipment Yes, extra equipment
Recommended pump capacity Lower or higher flows can be used: the crane will simply perform more slowly or faster 15-50 l/min 20-60 l/min 20-60 l/min 20-60 l/min
System pressure Lower pressure: lifting capacity will be reduced. Higher pressure: no increase in lifting capacity, as the hydraulic system is fitted with a pressure relief safety valve. 175 bar (175 kg/cm2) 175 bar (175 kg/cm2) 175 bar (175 kg/cm2) 175 bar (175 kg/cm2)
Maximum pressure 220 bar (220 kg/cm2) 220 bar (220 kg/cm2) 220 bar (220 kg/cm2) 220 bar (220 kg/cm2)
Lubricatable bushings or link bearings in all joints Yes/standard Yes/standard Yes/standard Yes/standard
3-point adaptor for 3-point hitch 28 mm category 2, 825 mm between hydraulic arms attachment points 28 mm category 2, 825 mm between hydraulic arms attachment points 28 mm category 2, 825 mm between hydraulic arms attachment points 28 mm category 2, 825 mm between hydraulic arms attachment points
Weight, including grapple, rotator and 3-point adaptor 810 kg 850 kg 1 015 kg 1 065 kg
Weight, 3-point adaptor 250 kg 250 kg 250 kg 250 kg
Weight, grapple 65 kg 65 kg 80 kg 80 kg

All performance specifications are pressure dependent are calculated at 175 bar pressure.

But are we right???

Our team loves to be right about everything! Don’t we all?!!!

However, sometimes we or our trusted team of supplies gets it wrong. If you find our technical data incorrect, please let us know so we can make it right.

Email: theteam@arblease.co.uk

Thanks for your support.

#teamgame #100%impartial #100%arb

REQUEST A CALL BACK

  • This field is for validation purposes and should be left unchanged.

x